Eagle

Manufacturer: RKI Instruments
Order / Quote

Unique EAGLE features include a catalytic sensor for LEL hydrocarbon detection at the push of a button, infrared sensors for % volume methane and carbon dioxide, and dual hydrophobic filters that increases its water resistant performance. The EAGLE has a strong internal pump with a low flow auto shut off and alarm, which can draw samples up to 125 feet even with the dual hydrophobic filters in place. This allows for quick response and recovery from distant sampling locations. With its ergonomic design and large glove friendly buttons, the EAGLE offers easy access to controls such as auto-calibration, alarm silence, demand zero, peak hold and a wide variety of other features. Each channel has two alarm levels plus TWA and STEL alarms for toxic channels. The two alarm levels are user adjustable and can be latching or self resetting. Rugged, reliable, easy to operate and maintain, the EAGLE is the solution for just about any portable gas monitoring situation. Datalogging optional (additional rental fees apply); shipped with padded carrying case with room for accessories and calibration gas (sold separately).

Key Features

  • Simultaneous detection of up to 6 different gases
  • Over 400 gas monitoring configurations
  • Wide range of toxic gases
  • PPM/LEL hydrocarbon detection
  • Powerful long-life pump up to 125’ range with filters
  • Low flow pump shut off and alarm
  • Methane elimination switch for environmental use
  • Security “Adjustment Lockout Switch”
  • Up to 30 hours of continuous operation
  • Alkaline or Ni-Cad capability
  • IR Sensors available for CO2, % LEL CH4 or HC, % volume CH4 or HC
  • Transformer testing version available
  • Datalogging option
  • Autocalibration/single gas calibration
  • Dual hydrophobic filters (most versions)
  • Ergonomic RFI / EMI / chemical / weather resistant enclosure
  • Intrinsically safe design, CSA (C / US) & UL classified (most versions)
  • Complies with EPA Method 21

Enclosure

  • Weather resistant, chemical resistant, RF/EMI coated high impact polycarbonate polyester blend; can be set in rain or into 2.5 inches of water without damage; ergonomically balanced with rugged top mounted handle

Dimensions

  • 10.5" long x 5.9" x 7" tall

Weight

  • 5 lbs

Detection Principle

  • Catalytic combustion, electrochemical cell, galvanic cell, and infrared

Sensor Life

  • 2 years under normal conditions

Sampling Method

  • Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH

Display

  • 4 x 20 LCD readout with backlighting; viewed through window in case top; displays readings & status of all channels simultaneously

Alarms

  • 2 alarms per channel plus TWA and STEL alarms; fully adjustable for levels, latching or self reset and silenceable

Alarm Method

  • Buzzer 85dB at 30 cm
  • Dual high intensity LED’s
  • Blinking display

Controls

  • 6 external push buttons for operation, demand zero, and autocalibration; buttons also access LEL/ppm, alarm silence, peak hold, TWA /STEL values, battery status and many other features

Continuous Operating Hours

  • 30 hours minimum using alkaline batteries
  • 18 hours using Ni-Cads

Power Source

  • Size D batteries, 4 alkaline or Ni-Cad
  • Charger has alkaline recognition to prevent battery damage if alkalines are charged

Operating Temperature & Humidity

  • -10° C to 40° C (14° F to 104° F), 0 to 95% RH, non-condensing

Indication Accuracy

  • Maximum variance +/- 5% of full scale

Response Time

  • 30 seconds to 90% (for most gases)

Safety Design

  • Intrinsically Safe, Class I, Division 1, Groups A, B, C and D. CSA / NRTL & UL Classified (most versions)

Standard Accesories

  • Shoulder strap
  • Alkaline batteries
  • Hydrophobic probe
  • 5 foot hose (for special toxic gas versions; shorter teflon hose used without probe)
Gas  Measuring Range  Accuracy* Whichever is greater 
Standard Confined Space Gases     
Hydrocarbons(CH4, std)  0 - 100% LEL  ± 5% of read-ing or ± 2% LEL (*) 
0 - 50,000 ppm  ± 50 ppm or ± 10% of reading (*)   
Oxygen (O2 0 - 40% Vol.  ± 0.5% O2 
Carbon Monoxide (CO)  0 - 500 ppm  ± 5% of read-ing or ± 5 ppm CO (*) 
Hydrogen Sulfide (H2S)  0 - 100 ppm  ± 5% of read-ing or ± 2 ppm H2S (*) 
Super Toxics and Other Gases     
Ammonia (NH3 0 - 75 ppm  ± 10% of reading or ± 5% of full scale (*) 
Arsine (AsH3 0 - 1 ppm0 - 200 ppb   
Chlorine (Cl2 0 - 3 ppm   
Chlorine Dioxide (ClO2 0 - 1 ppm   
Fluorine (F2 0 - 5 ppm   
Hydrogen Fluoride (HF)  0 - 9 ppm   
Hydrogen Chloride (HCl)  0 - 15 ppm   
Hydrogen Cyanide (HCN)  0 - 30 ppm   
Hydrogen Selenide (H2Se)  0 - 0.2 ppm   
Hydrogen Sulfide (H2S)  0 - 1 ppm0 - 30 ppm   
Nitrogen Dioxide (NO2 0 - 15 ppm   
Ozone (O3 0 - 1 ppm   
Nitric Oxide (NO)  0 - 100 ppm   
Phosphine (PH3 0 - 1 ppm   
Silane (SiPH4 0 - 15 ppm   
Sulfur Dioxide (SO2 0 - 6 ppm   
IR Sensors     
Carbon Dioxide (CO2)(IR Sensor)  0 - 5,000 ppm0 - 10,000 ppm0 - 5% Vol. 0 - 20% Vol. 0 - 60% Vol.  ± 5% of read-ing or ± 2% of full scale (*)
Methane (CH4)(IR Sensor)  0 - 100% LEL 0 - 100% Vol.   
Isobutane (iC4H10)(IR Sensor)  0 - 100% LEL 0 - 30% Vol.   
 

Specifications subject to change without notice

  • Confined space entry
  • Leak investigation
  • Line purge testing
  • VOC monitoring
  • Transformer testing
  • Landfill monitoring

Download
Download
Download