Manufacturer: RKI Instruments
Order / Quote
The next generation of our popular EAGLE portable gas detector. Equipped with features that are not available on competitive units, the EAGLE 2 is a powerful instrument that does more than just offer the standard confined space protection for LEL, O2, H2S and CO. Detection combinations never before offered in a portable gas monitor are now available featuring the industry’s widest selection of high quality, long life and field proven sensors. The EAGLE 2 now includes PID (Photo Ionization Detector) capability. Conversion factors for a variety of common gases are programmed into the EAGLE 2 for both the PID sensor and LEL/PPM catalytic sensor.
Key Features
- Test Monitor up to 6 different autoranging gases
- PPM / LEL hydrocarbon detection
- PID (Photo Ionization Detector) low and high range for VOC detection
- Infrared sensors available for CO2, % LEL CH4, % Vol. CH4, % LEL HC, % Vol. HC
- TC (Thermal Conductivity) sensor available for % Vol. H2 or % Vol. CH4
- Plug and play, smart toxic sensors
- Hundreds of configurations
- Displays in 5 languages
- Powerful long-life pump up to 125’ range
- Low flow pump shut off and alarm
- Methane elimination for environmental use
- Alkaline 18 hours or Ni-MH 20 hours capability
- Password protection
- Datalogging standard
- IrDA communications port
- Autocalibration/single gas calibration
- Internal hydrophobic dust filter
- External probe with hydrophobic filter
- Ergonomic RFI / EMI / chemical / weather resistant enclosure
- Intrinsically safe design, CSA approval
Enclosure
- Weatherproof, chemical resistant, anti RFI / EMI coated high impact polycarbonate - PBT blend
- Can operate in rain or be set into 2.0” of water without leakage
- Ergonomically balanced with rugged top mounted handle
Dimensions
- 9.5” L x 5.25” W x 5.875” H (241mm L x 140mm W x 149mm H)
Weight
- 3.8 Lbs (1.72kg) (standard 4 gas with batteries)
Detection Principle
- Catalytic combustion, electrochemical, galvanic, infrared, photo ionization, and thermal conductivity
Sensor Life
- 2 Years under normal conditions
Sampling Method
- Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet
- Flow rate approximately 2.0 SCFH
Display
- Backlit 128 x 64 graphics display; viewed through window in case top
- Displays readings & status of all 6 channels simultaneously
- Backlight, illuminates for alarms and on demand with adjustable time
- Optional mode allows automatic or manual scrolling display of just one gas at a time with very large characters
Language
- Readout can display in 5 languages (English, French, German, Italian, or Spanish)
Alarms
- 2 Alarms per channel plus TWA and STEL alarms for toxics; both alarms are fully adjustable for levels, latching or self reset, and silenceable
Alarm Method
- Buzzer 95 dB at 30 cm, four high intensity LED’s
Controls
- 4 External glove friendly push buttons for operation, demand zero, and autocalibration
- Buttons also access LEL/ppm, % Vol. alarm silence, peak hold, TWA/STEL values, battery status, conversion factors, and many other features
Continuous Operation
- At 70°F, (21°C) 16 hours using alkaline batteries, or 18 hours using Ni-MH
Power Source
- 4 Alkaline or Ni-MH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines)
Operating Temperature & Humidity
- -4° to 122° F (-20° to 50° C)
- 0 to 95% RH, non-condensing
Response Time
- 30 Seconds to 90% of range (for most gases) using standard 5 ft hose
Safety Rating
- Intrinsically Safe, Class I, Division 1, Groups A, B, C, D
Standard Accessories
- Shoulder strap, alkaline batteries, hydrophobic probe, 5 foot hose, and internal hydrophobic filter
Warranty
- Two year material and workmanship, one year for PID sensor
- Confined space entry
- Leak investigation
- Line purge testing
- VOC monitoring
- Transformer testing
- Landfill monitoring