LTC Levelogger Junior

LTC Levelogger Junior

Manufacturer: Solinst
Part Number: Junior LTC
Order / Quote

The LTC Levelogger Junior logs conductivity, as well as water level and temperature. Like the LT Levelogger Junior Edge, it is easy to transport, program, deploy and retrieve data. It combines a datalogger, 5-year battery, Hastelloy® pressure sensor, temperature detector, and conductivity sensor within a small waterproof housing, 7/8" x 7.5" (22 mm x 190 mm).

The conductivity sensor is a 4-electrode platinum sensor, with auto-ranging capabilities. The minimal maintenance, sealed LTC Levelogger Junior is simple to clean and calibrate, even in the field.

Using Levelogger Series Software, it displays conductivity, temperature, and temperature-compensated water level. Memory is non-volatile and stores up to 16,000 sets of readings. Measurements are linear, in any interval between 5 seconds and 99 hours.

Level Sensor: Piezoresistive Silicon with Hastelloy Sensor
Ranges: F30/M10, F100/M30
Accuracy (typical): 0.1% FS
Normalization: Automatic Temp Compensation
Temperature Sensor: Platinum Resistance Temperature Detector (RTD)
Accuracy: ± 0.1°C
Resolution: 0.1°C
Temp Compensation Range: 10˚C to 40˚C
Conductivity Sensor: 4-Electrode Platinum
Full Range: 0 - 80,000 µS/cm
Calibrated Range: 500 µS/cm - 50,000 µS/cm
Accuracy: 2% of reading or 20 µS/cm
Resolution: 1 µS
Temp Compensation Range: 0°C to 40°C
Normalization: Specific Conductance @ 25°C
Battery life: 5 Years (5 minute sampling rate)
Clock Accuracy: ± 1 minute/year from 0 to 40°C
Operating Temperature: - 20°C to 80°C
Memory: Non-volatile EEPROM, FRAM back-up
Maximum # Readings: 16,000 sets of readings
Communication: Optical Infra-Red to USB or RS232
Size: 7/8" x 7.5" (22 mm x 190 mm)
Weight: 7.05 oz. (200 grams)
Wetted Materials: Platinum, Hastelloy, 316L Stainless Steel, Delrin®, Viton®
Sampling Mode: Linear, (5 sec to 99 hrs), Real Time View, Future Start
Barometric Compensation: Software Wizard and Barologger Edge