InfraCal TOG/TPH Analyzer

Manufacturer: Wilks Enterprises
Part Number: 405-1009
Order / Quote

This model is recommended for measuring total oil and grease (TOG) and total petroleum hydrocarbon (TPH) levels in water and soils, as well as fats, oil and grease (FOG) in wastewater when using hexane, pentane or Vetrel MCA as the extracting solvent. The solvent extract is evaporated and the residual oil is measured— much like EPA Method 1664. Note: Light end volatile components will be lost in the extraction process. The analyzer is equipped with a built-in cubic zirconia horizontal attenuated total reflection (HATR) sample stage.

  • Analyze produced water on offshore oil rigs
  • Monitor effluents from refineries or wastewater treatment and industrial plants
  • Measurement of fats, oil and grease (FOG) discharges
  • Determine efficiency of oil/water separation systems
  • Conduct soil studies at remediation sites or around underground storage tanks
  • Measurement of residual oil in solvent for metal parts cleaning
  • Determine purity level of reclaimed solvents or virtually any on-site testing of water and soil requiring measurement of TOG and/or TPH concentration levels

Analytical Wavelength/Wave Number

  • 3.4 µm, 2930 cm-1

Power Requirements

  • 12 Volts DC, 2.0 amps, 12 Volt battery pack or adapter available

Power Supply

  • Universal AC/DC

Weight

  • 4.5 lbs. (2.0 kgs)

Dimensions

  • 6.5 x 6.5 x 5" (165 x 165 x 127 mm)

Suggested Operating Range

  • 5° C - 40° C

Typical Useful Measurement Range

  • for Water: 9 - 1000 ppm
  • for Soil: 40 - 5000 ppm

Analysis Time

  • 10 - 15 minutes, including extraction process

Instrument Repeatability

  • +/-2 ppm

Communication Port

  • RS232 port, 9-pin D-Sub female, PC compatible

Suggested Solvents

  • Hexane
  • Pentane
  • Vertrel MCA

Download
Download