EZ-Stop II 100% Tie-Off Lanyard Shock Absorbing

EZ-Stop II 100% Tie-Off Lanyard Shock Absorbing

Manufacturer: DBI
Part Number: 1240406
Order / Quote

Our EZ Stop® II shock absorbing lanyards are designed for versatility and are available in many variations including this twin-leg 100% tie-off model that gives you added safety by helping you remain connected at all times. There is certain to be a model that will meet your fall arrest requirements from this popular product line. All EZ Stop® II lanyards utilize a controlled tearing action when subjected to fall arrest forces, limiting arresting forces to no more than 900 lbs.

Every DBI-SALA lanyard combines super strength and ease of use without sacrificing safety. All lanyard hardware is proof tested to meet or exceed industry standards before you even get it. Standard on all DBI-SALA lanyards are our patented, user-friendly self locking snap hooks. They allow you to open and close the hook even with gloves on without getting your thumb or fingers in the way, they're industry preferred!

  • 1" polyester webbing for durability and longevity
  • Twin-leg 100% tie-off style helps you remain connected at all times
  • Easy to use self locking snap hooks at leg ends and center
  • Soft cover shock absorber for comfort
  • 6 ft. in length
  • Limits arresting forces to 900 lbs. or less
  • Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359
Similar Models:
  • 1240416: with self locking snap hook at center and aluminum hooks (2-1/4" opening) at the leg ends.
  • 1241006 : with elastic legs and self-locking snaphooks at ends

  • The maximum arresting force of DBI‑SALA Energy Absorbing Lanyards and components when dynamically tested in accordance with ANSI Z359.1 is 900 lbs. (4 kN). (EZ STOP® III and ShockWave 2 models less than 6 ft. [1.8 m] in length, maximum arresting force is 1800 lbs. [8 kN], Shockwave 2 Tie-back, maximum arrresting force is 1350 lbs [6 kN])
  • The maximum elongation of the Energy Absorbing Lanyard or Energy Absorber component when dynamically tested in accordance with ANSI Z359.1 is 42 in. (1 m)
  • Maximum free fall distance must be no greater than 6 ft. (1.8 m) per federal law and ANSI Z359.1
  • EZ STOP® II U.S. Patent Number 5,174,410
  • 9503175 Self-closing and self-locking snap hook U.S. Patent Number 4,977,647, Can. 2,027,784

Energy Absorber Specifications

  • 1 3/4 in. (4.4 cm) polyester web strength member
  • tubular nylon web wear pads both ends
  • nylon outer cover
  • polyester thread
  • 100% tie-off
  • 8,800^lb. (39.1^kN) tensile strength