Stainless Steel Mega-Monsoon Pump

Manufacturer: Proactive
Part Number: PS-10420
Order / Quote

The SS Mega-Monsoon® pump is capable of pumping up to 200 ft. from ground level by simply connecting it to a 12 volt battery. Its reliable design is suitable for continuous purging of groundwater wells. Simple to use and extremely powerful.

The SS Mega-Monsoon® is capable of pumping up to 200 ft. from ground level to water level. Simply, connect the pump connector to the Low Flow with Power Booster 3 "LCD" Controller, then to a 12 volt battery, energizing the pump.

The SS Mega-Monsoon® can operate under harsh conditions with higher turbidity. It has been installed in hundreds of remediation sites using pump and treat systems. It can also be used with solar panels for long term remediation sites.

The main wear out parts consisting of the motor and seal all have been incorporated in a single replaceable motor module. Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 30 seconds by a simple quarter turn twist! Once installed, your pump is essentially new and will have a life span identical to a new pump.

Low Flow Sample as low as 10 M/L per minute, from any depth, when using the Low Flow with Power Booster 3 “LCD” Controller and Non-Return Check Valve. Easy to read LCD display conveniently placed on top of the Low Flow with Power Booster 3 “LCD” Controller makes adjusting and reading the discharge rate easy.

Key Features

  • Runs off any 12 volt DC batteries
  • Lifts up to 200 ft. deep from ground level to water level
  • Reliable design is suitable for continuous purging of groundwater wells
  • Computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • Long lasting, high performance pump motor lasts over 400 hours under normal working conditions
  • Simple to clean and decontaminate

Power Consumption

  • 1100 watts (max)

Volt Recommendation

  • 12-15 at source

Maximum Amp Output

  • 42 amps

Measurements

  • Length: 7.5 " / diameter: 1.82"

Constructed

  • High polish stainless steel

Required Tubing

  • 3/8" ID poly can be used

Supplied With

  • 210 ft. of heavy duty 12 gauge wire
  • Additional motor module
  • Disposable low flow control valve
  • Wrench

Download